It should be noted, as soon as possible, that the new Ssangjong Kairon's new ball support vehicles cannot be replaced-since 2012, upper and lower levers are used in the front suspension with non-replaceable balls. Therefore, when the ball is worn, the entire lever is replaced.
In the suspension of the old specimen, only the lower shuffling support leg is replaced as follows:
- Remove the front wheel;
- Scroll the nut, holding the finger in the ball.
- With the help of a special device, push the finger of the ball at the turning fist;
- The key is to rotate the four bolts that hold the ball on the lever;
- Set the new ball in reverse order.
In the absence of a special tool to pull the finger of the finger, the hammer may be used-with enough heavy punching at the bottom of the turning fist, the finger must exit. However, this technique is fraught with deformation of the suspension parts, so it is necessary to use it with caution.
After replacing the support leg, it is necessary to regulate the assembly and collapse.