SilentBlock is an important piece of suspension, which provides the mobility of elements relative to each other, and also removes metal parts from friction. If the site is incapacitating or incapacitating, it must be changed. On all models of VAZ (2101, 2102, 2103, 2104, 2105, 2106 and 2107), the front assembly blocks are changed the same. How to replace the site with the VAZ levers:
1. Lift the car, remove the front wheel.
2. Roll out the nut on the top of the cage (you need a key of 24).
3. Same key to 24 unscrew the nut on top of the ball, and then use the lift to unstick the anvil (instead of the lift, two keys can be used instead of a lift to detach the support leg).
4. Scroll the clip of the steering nozzle and press it.
5. Remove the nut-axis of the upper arm and remove the axle. In the cars of VAZ 2104, 2105 or 2107, it will also be necessary to unroll a vertically positioned bolt that attaches the bumper.
6. Pressing the lever in the vice, press and replace the siloent of the upper lever with the help of a special tool.
7. Slower the axis of the upper arm and then put the lever in place. The axis of the axis is not long.
8. Gather the back order, spin the wheel, lower the car, and then tighten the axle nut to the end.
You can then replace the bottom lever on the site:
1. Scroll down the bottom of the bottom of the lever (you need a key to 22).
2. Use the tenant's help to squeeze the site. Note that the installation of the lift may require the removal of the steering gear.
3. Extract the block, lubricate the oil axis, and insert a new site.
4. Insert a stubborn brace between the lever and the nut which attaches the lower lever to the beam.
5. Encapsulate the unit, and then install and splash the steering gear.
6. The assembly is reversed.
