To remove the front shock absorber at Chevrolet Cobalt, you must:
1) Lift the vehicle and remove the front wheel from the rack cabinet.
(2) It is best to fix the auto-it is best to install suitable coaster.
3) Connect the tip of the stabilizer bar from the shock absorber to the "18" key.
(4) Head "21" to unscrew the fastening of the shock absorber to the swivel.
(5) Carefully dislodge the two screws of the shock absorber of the shock absorber.
(6) Remove the windscreen of the windscreen.
(7) Remove the protective cover of the fastening of the shock absorber to the bodywork.
(8) Holding the shock absorber of the shock absorber by the T-50 BRAX key, almost completely unfastening the clip-nut of the frame with the key "on 24".
(9) Holding the shock absorber at the bottom, fully unscrew the nut with the hands.
10) Remove the rack top washer and shock absorber in the assembly.
(11) With the help of a special jet, carefully squeeze the spring until its turns are stopped.
(12) The key "on 24" unscrew the top nut nut.
13) Replace the depreciation rack.
14) set everything in reverse sequence. The moment of the fastening of the rack-mount nut to the body-55 Nm, the rack anchorage for the rack cabinet, 100 Nm, and the fastening of the rack cabinet.
