To change the ball joint at the Chevrolet Captiva, you need to do something like this:
(1) Cease the car and remove the wheel.
(2) Remove the bottom arm of the suspension, unscrew the attachment to the bodywork and the bodywork.
(3) Position the lever.
(4) Coule the shuffles of the ball support leg by 8 mm.
5) Increase the diameter of the drilling holes by 12 mm.
(6) Remove the ball joint, first remembering its position for the possibility of the reverse assembly.
7) Install a new hinge.
(8) Attach a bolts to the anvil. The eyebolts must be located at the top of the hinge.
(9) tighten the nuts at 68 Nm.
10) Force the lever in place.
