In order to replace the oil on the Jeep Grand Cherokee bridges, WK will need a hexagon by 14, 4 liters of transmissive oil (75W-140), a cleaner, a sealant and an additive for cars with self-locking differential. Order of work:
- Unwind engine protection (4 bolts).
- We find the filler and the cork of the front bridge.
- Unplug the cork and drain the oil into the tank.
- Scrolling two bolts of the support leg so that you can get close to the flange of the bridge.
- Disconnect the connector and the rubber hose.
- I've got ten bolts off, taking the flange.
- Everything is meticulous and dry.
- A fat flange and a leak on the landing surface.
- We put the flange in place and wait for about an hour to get a leak.
- We finish the cork and fill the new oil with the additive until it starts to flow through the holes. We need about 1.5 liters of oil.
The oil in the back bridge changes the same way. You'll need about 2.5 liters of oil to replace it.
