Oil in a manual gearbox of Calyber is required to change every 80,000 km. mileage.
Litres of original oil-05013457AA
0VU02 153AC
Any analogue of ATF + 4 MS-9602 (fully synthetic oil) is also suitable. Three gallon jerricans or one gallon will be required to replace it. To change the oil in the ICPC, you must do the following:
1. Unscrew a hexagonal key with a hexagonal key, drain the oil, and roll the nut clip again.
2. Remove the filler (1), which is inserted into the oil level control opening in the ICIE.
3. Insert a funnel with a hose in the hole (2). The hose diameter shall not be more than 2 cm.
You do not need to film the air filter to fill the oil.
It is necessary to pour the oil through the hole until it begins to exit the hole (1). If the old oil was removed completely, it is necessary to fill 3 liters of fresh oil.
