To check the fluid level in the automatic box of the Chevrolet Captiva, you should follow this procedure:
(1) Start and start the engine, until the temperature of the transmission fluid reaches 70-80 degrees (for this it is sufficient to travel about 5 to 10 minutes).
2) Translate the selector lever to each position for a few seconds, then set it into P mode.
3) Extracting the bolt from the oil probe.
4) Push the probe, clear it with a paper towel, and put it back again.
5) Remove the probe back and check the level of the liquid-it must be between the MIN and MAX NOT hot spots.
(6) Insert the probe back.