The first generation of the first generation of BMW oil is performed by the scanner on the "Service Functions" menu. If there is no scanner, you can unplug the cork of the filler hole if the engine is running: if the oil does not flow, then it must be filled. If there is a need for a liquid surface, do the following: We put the car on the level floor. We pour the recommended liquid through the filler hole until it starts to flow. We start the engine and we pour the oil again until it starts to flow out of the hole. We're going to finish the cork.
- Put the car on the flat ground.
- Through the filler hole, pour the recommended liquid, until it begins to flow.
- Start the engine and pour the oil again until it comes out of the hole.
- We're closing the cork.
