The automatic box of the second generation BMW is adapted to the driver's style of driving. If you need to return to the factory settings for a variety of reasons, you must do the following: Turn off the ignition. Press the start button one time to turn on the ignition without starting the engine. If the start-stop button is not present, then turn the key to the end without pressing the brake pedal until the pedal is pressed and holding it for at least 30 seconds. The box has been reset to factory settings. It should be noted that after this procedure the more "sporting" behaviour of ACPR with increased fuel consumption is possible.
- Turn the ignition off.
- Press the start button one time to turn on the ignition without starting the engine. If the start-stop buttons do not, then pivot the key to the end without pressing the brake pedal
- We press the gas pedal to the point and hold it for at least 30 seconds.
- Get the pedal off and start the engine. The box has been reset to factory settings. It should be noted that after this procedure the more "sporting" behaviour of ACPR with increased fuel consumption is possible.
