The salon filter is placed under the right side of the plastic toad, from the side of the passenger compartment. To get to the filter, you have to remove half of the toad, with the wiper wiper and the second half of the toad not to be removed. The first thing to do is to set the windshield wipers to the left. Open the hood, remove the rubber sealant from the partition between the engine compartment and the niches where the filter is installed. Roll out the plastic screws (on cars that were issued before 1998) or rip off the paistons (on cars manufactured after 1998) and remove the right side of the toad. Next, you need to extract the salon filter together with a fastening filter. Clear the gap from dirt, dust, and dry leaves.
- The first thing to do is set the windshield wipers to the left.
- Open the hood, remove the rubber sealant from the partition between the engine compartment and the niches where the filter is installed.
- Roll out plastic screws (on cars that were issued before 1998) or disrupt the paistons (on cars manufactured after 1998) and remove the right side of the toad.
- Next, you need to extract the salon filter together with a mounting bracket.
- Replace the filter.
- Clear the niche from dirt, dust, and dry leaves.
- Collect everything in reverse order.