The reason is the freezing of the throttle cable. With the engine switched off, the throttle from the throttle shall be condensation, which will then freeze.
The problem is solved by a lubricant, as follows:
- (a) remove the cable from the side of the throttle;
- Removing the duster;
- fill between the cable and its shell with any lubricant (engine oil, brake fluid, special silicon grease);
- To work with the gas pedal to distribute the lubricant along the cable;
- Add a lubricant if necessary;
- Process a litomas or other thick lubricant which will prevent moisture from entering the cable;
- Install a duster, reconnect a throttle wire.
During the removal of the tether, it is impossible to make any adjustment on the cable or at the throttle, as it may disrupt the operation of the engine.
