If there is no armrest in the picking, you can install it yourself. At the same time, the car owner has a choice: to buy a ready arm, suitable for his car, or to make it with his own hands. The first path is simpler, but very often motorists choose the second path to make the arm-pot exactly as they want to see it. So, if you didn' t skip work and drawing lessons at school, and you can keep a building tool in your hands, you don't have to do it with your hands. How to make a arm-pot in your car with your hands
How to make a arm-pot in your car with your hands
You will need the following materials to make your own car arm for your car:
- plywood (recommended 8 mm thickness),
- lullaby loop
- powder,
- skin, dermann, or other material for upholstery.
In addition, you will need a millimeter paper, a pencil, a construction tool, a drawing tool.
The sequence of actions in the manufacturing of the armor is as follows: Measure the distance between the front seats. At the same time, make sure that your planned armor does not interfere with the seat belt and lift the handbrake. In a millimetre paper, draw a sketch of the future armor on the plywood, cut out all the details, and fast' them with glue or screws. If you want, you can secure the cup holder cells inside of the armrest, or you can split into several compartments-everything depends on your fantasy. Use the cable loop to secure the cover on the armrest. Lock the armrest between the seats. Most often, this is done simply by the size of the arm's size (if it is too narrow, to secure the extra pieces of plywood on the sides.
- Measure the distance between front seats.
- Present the dimensions of the future armrest, measure its intended width, length, and height. At the same time, make sure that your planned armor does not interfere with the seat belt and lift the handbrake.
- In millimetre paper, draw a sketch of the future armrest.
- Move the drawing to the plywood, cut out all the details, and staple them with glue or screws.
- The cover of the future armrest is better to wet and gently bend so that the armrest does not appear to be a normal rectangular box, but has a more aesthetic appearance.
- Cut a piece of powder by the size of the lid, glued it on top.
- Cover the arm's arm and cover with the prepared material.
- The inner surface of the armrest can be broken or painted if desired.
- If you want, you can secure the cup holder cells inside of the armrest, or you can split into several compartments-everything depends on your fantasy.
- Use the cable loop to secure the cover on the armrest.
- Lock the armrest between the seats. Most often, this is done simply by the size of the arm's size (if it is too narrow, to secure the extra pieces of plywood on the sides.
