To replace the cable of the parking brake on the Opel Vector B, the following must be done:
(1) By becoming a car in the pit and including the gear.
2) Remove the car from the handbrake.
(3) Remove the retention of the silencer.
(4) With the help of a wide screwdriver, push the back cable of the handbrake to the brake shoe holder.
(5) The fastening of the cable shall be three places on each side.
(6) Concatenation of the cable from the front. To do this, turn the T-shaped tip horizontally.
(7) A cable shall be removed from the remaining two anchorages.
(8) A new cable in reverse order.
