Replacement of brake pads and discs on the Opel Vectra B in such a sequence:
(1) Rise the car and remove the wheel.
2) A "5" wheel drive bolts of the brake disc to the hub.
(3) Remove the rubber rails, the hexagon "by 7", unwind the rail guides.
(4) Remove the spring.
5) Insert a screwdriver between the disc and the upper bracket and push the beads to the side.
6) Disconnect the brake hose from the cushioning rack. The upper part of the sub-port is carefully placed on the removed wheel.
7) Remove the brake disc.
8) Scroll down the bottom half of the hexagon "by 10".
(9) Clear all details.
(10) Clamp the piston with the piston and put the new pads in the sub-port.
(11) Lubricating special grease rails and gather all to place, degreasing the new brake disc.
