The brake pads on Hendai Goetz are changing as they are worn out. Replace the pads with Hyundai Getz with their own hands simply by: remove the wheel, spin the bolt, press the dry port, lift the port, open the pistons, insert new pads, and reverse the wheel.
- to remove the wheel,
- unscrew the screw, which is holding the sub-port
- lift the subport,
- to press the pistons,
- insert new pads,
- gather everything in reverse order.
Note that the tip of Hendai Goetz is changed by the kit, that is, if you change the pad at the front, all 4-wheels on both wheels are replaced. At the end of all works, without removing the car from the handbrake, it is necessary to start a motor and press the brake several times so that the newly installed pads are installed.
