Replacing the front brake pads on Chevrolet Cobalt must be performed in this sequence:
(1) Check brake fluid level. If it is near the max.
2) Remove the front wheel and secure the car.
(3) Rotating the rudder to the side where the beads are changing.
(4) Use a screwdriver to remove the spring lock on the outer pad.
5) Insert a screwdriver in the dry port window and pour the piston into the cylinder.
6) Move the sub-port along the guide fingers.
(7) Remove the cover of the back screwings.
(8) With the help of the hexagon "by 7" unwind the bottom guide and remove it.
(9) Also remove the top rail.
(10) Take off the boat with the pad.
(11) Use a screwdriver to remove the outer pad.
12) Remove the inner pad.
(13) Clean parts of the brake mechanism and put new wheels, prelimine to the maximum of the piston in the cylinder.
14) Gather all back. Point of thumb rails-35 Nm
(15) The brake pedal shall be applied several times for the final installation of the pad.
(16) Check brake fluid level, if necessary-millet.
