Removal and installation of the front wing at Honda Civil 8

Removal and installation of the front wing for some Honda Civil models: Move the GRU DPMG to remove the tabs and disconnect the tool from the bezel tank. Detach the hook and remove the bezel and the conductor. Set up the trim panel in reverse order, replacing the anchors with the new hooks and securing them firmly.

1. Move the beam of the GRM fluid reservoir.
2. Remove the retainers and disconnect the roger from the washer.
3. Detach the hook, then remove the wing and the conductor of the washer.
4. Set up the trim panel in reverse order, replacing the retainers with the new one and securing them firmly.

Add comment