The rearview mirror on the fourth generation of 4th generation in this sequence: Lean edge of the adhesive tape to protect it from damage. Connect the connectors from the mirror and remove it from the mirror. Release the two screws located under the mirror. Unlock the two top clips. Unlock the lower retaining clip and remove the mirror from the mirror. Disconnect the connector from the mirror. The rear of the mirror is removed from the mirror and the rear of the mirror is removed from the mirror.
- Lean adhesive tape to protect it from damage.
- The right lever is the mirror and pull it out of the enclosure.
- Detach the connectors from the mirrored unit.
- Scrolls the two screws located below the mirror.
- Unlock the top two clips.
- Unlock the lower clamp and remove the mirror from the lining.
- Disconnect the connector and remove the direction indicator from the mirror.
- Set the hull in reverse order.
