Before you disassemble the KIA Rio III mirror, you need to remove it. To do this, remove the plastic filler in the passenger compartment and roll three screws. Then you can begin parsing the enclosure itself.
We need to put pressure on that part of the mirror that's closer to the door. As a result, a gap is formed between the mirror and the plastic casing. There are several latches on which the glass is held. You can do that with a finger and a screwdriver. To make the mirror snapped smoothly, but with an effort to pull it on itself. On the opposite side, two wires of glass heating are suitable for the mirror, which may be broken if the glass is too strong. Wires are easily disconnected from the mirror.
Now you can remove the linings. Three latches visible are sufficient for this. It is more convenient to make three flat-blade screwdrivers to fix and lock it in this position. Next, put pressure on it from the inside and lift it off the edge.
