Laser-lifts do not work with ignition off. They continue to operate immediately after the ignition of the ignition for 30 seconds, and shall be deactivated.
There are two options for upgrading: the first window-lifts will work continuously, and the second one will always work when the machine is not put on guard.
The advantages of the first variant-the ski lifts will always work. Deficiencies-the control unit of the window-lifts will be permanently energyled, which may result in a discharge of the battery. Also, the buttons of the window-lifts will always glow, which will help the attackers get into the passenger compartment by squeezing the top of the door and lowering the glass. To implement the first option, you need to close the contacts in which the electric lifts are installed. The relays must be removed. You can close the contacts with a small wire with the adhesive at the ends.
Now you need to turn off the control box of the car's brain-lifts (ETACS). To do this, we need to extract a driver's unit of glass-lift control, find a purple line, cut it, and seal off the ends.
The second option can be implemented by passing the "right" to the alarm control. To do this, we need to install the alarm relays in place of the regular lift relay. It will also be necessary to cut the purple wire as in the first version.