The rear lamps of KIA Sorento II are held on two screws for a Phillips screwdriver and two rails, which are fixed in plastic groans on the body.
To remove the lantern, it is necessary to unscrew both screws and pull the lantern by the guide. The guides are pretty strong, so you need to be confident. At the same time, you cannot swing the lantern from side to side, you need to draw a strict page. Then disconnect the power connector.
The lamp shall be installed in reverse order. After you plug in the connector, you need to slide the connectors into the pajamas and push the screws to the mouse clicks and then press the screws.
