Some of the excisions were equipped with a pull-out antenna, which resulted in an electric motor. The top of the antenna is the first symptom of the malfunction.
The first thing to do is to remove the antenna, unscrew one nut on the outside on 17 and two inside 10. Then disconnect the antenna connector, the power connector, and the drainage tube. Now open the frame of the antenna, unwind all the smores, remove the plastic baton plastic at the bottom of the antenna, then remove the metal bar above the motor-worm gear, the table ring in the gears, and the gears of the two halves.
Now we need to cut a strip of metal or plastic with a size of 110x6 mm. and insert it from the back of the jagged tape. It would be a mistake to miss all the lithole and collect it back.
