Corrective adjustments of the fuel level sensor located in the Adi 100 4th generation fuel tank shall be carried out with the help of special calibration resistors to be used in place of the sensor. At the same time, a simplified calibration can be made without the use of special tools. To do this: We unscrew the filler panels under the panel and remove the lining. The propellator below the fuel cell is located under the fuel level of the hexagon. Fill the full tank with the fuel tank and set the level of the cap to the "full tank". Setup is complete.
- Unscrew the filler panels and remove the linings.
- Below the fuel level indicator is the adjustment screw for the hexagon.
- Fill the full tank of fuel and set the level down arrow key to the "full tank" mark. Setup is complete.
