To replace the straps to Jill MC, you need to:
1. Unscrew the bolts A and B.
2. Remove the bolt C and remove the blade belt.
3. Remove the air conditioning compressor's belt. To do this, you should unscrew the nut A, then bolt the belt and remove the belt.
4. Remove the belt of water.
5. Remove the bolts A and B and remove the belt of the steering wheel.
6. Install new seatbelts by adjusting their tension. bolts and nuts: Bolt A Hydroamplifier-39 Nm Geika of air conditioner-39 Nm Bolt A generator-18 Nm, bolt B 58 Nm.
- The Bolt A Hydroamplifier is 39 Nm.
- The A/C ACs are 39 Nm.
- Bolt A generator-18 Nm, bolt B 58 Nm.