To replace the oil, you must first clear the cork with a metal brush and a rag. Then it is necessary to turn away the cork, prepining the capacity of at least 5 litres for the discharge of oil. After the oil is mucus oil, it is necessary to insert the cork back, replacing the copper puck in case of damage.
Then, with the help of a special lift, filter the oil filter. We take the new filter, smeer his seal with the engine oil and hand it in. Pour the new oil up to the right level and start the engine. After 2-3 minutes of operation, the oil pressure signal lamp shall be repaid. We're running a deep engine, checking the oil level, and we're mileating it if necessary.
