To replace the engine oil on Mazda 3 (I): Set the car on the horizontal surface and warm the engine to the normal operating temperature. Then stop the engine and wait 5 minutes. The oil level must be positioned between the "F" and "L" on the probe. If the oil level is lower than "L", remove the oil filler cap, the oil pan, and the oil filter. pallet, install the cork and delay the engine oil of the specified type and quantity in the engine oil.
- Install the vehicle on a horizontal surface and warm the engine to normal operating temperature.
- Then stop the engine and wait 5 minutes.
- Get a probe to measure the level of oil.
- The oil level shall be between the labels "F" and "L" per probe.
- Do the oil if the oil is lower than the "L" label.
- Remove the cover of the oil filler, the oil pan cork and the oil filter.
- Whether the motor oil is to be used in the waiting capacity.
- Set the oil filter cork with the new rubber sealant and tighten it at 9 to 10 Nm.
- Clear the flange of the oil pan, install the cork and tighten it up to 25 to 30 Nm.
- Foil the engine with the engine oil of the specified type and quantity.
