To remove the petrol nozzle on Mazda 3 (I) it is necessary to: Switch off the fuel nozzle connector and remove the fuel injector. Remove the fuel injector. Remove the fuel injector. Remove the fuel injector. The nozzles and the fuel injects of the burner shall be made to be parallel to the flange of the propellant.
- Deactivate the ASB and remove the air filter.
- Then disconnect the fuel injectors plug and remove the quick connector.
- Also remove the fuel distributor.
- Remove the fuel injeckey clamps alternating between the sides and moving it in the centre of the direction.
- Soil a new rubber sealant.
- Install the fuel nozzle into the hole so that it orbits smoothly.
- Apply a new fuel injectable to the fuel injectable and install a supporting element at the bottom of the Fuel injectable connector.
- Insert the flange of the fuel injeckey into the fuel injectress deck and shift the fuel injects into the burner fuel, and the fuel injeckey flange shall be parallel to the flange of the fuelwood.