In most of the models, the generator is the same, so the procedure for disasseming and replacing the generator at "classic" (VAZ 2105, 2106 and 2107), "Samara" (2108, 2109 and 21099), "tenth" family (2110, 2111 and 2115) and "new Samara" (2113, 2114 and 2115) is almost identical. Replacing the generator with the VAZ is not a very complex procedure, you can do it with your own hands.
The replacement of the generator in the VAZ vehicles should be done as follows:
1. Minus the cell from the battery.
2. Remove the engine spray.
3. To initiate a generator.
4. Roll out a nut that attaches wires to the top of the generator and then remove both wires.
5. Remove the belt generator.
6. Scroll the generator bolt and remove it from the upper arm.
7. Remove the tensible bar.
8. Remove the lower nut of the generator support, remove the bolt (the generator should be kept). If the bolts are not removed during the disassembly process, WD-40 should be used.
9. Extract the generator.
Installing a new generator and subsequent assembly is done in reverse sequence. Particular attention should be paid to the tension of the belt, because a belt that is not tight can get off pulley and cause new trouble, and too tight the belt will quickly incapacize the bearings.
The process of replacing the VAZ emitter can be viewed in the video, where you can see how to remove the old generator and supply a new one:
