To change the belt of the GRM on Santa Fe with petrol 2.70-litre engine, you need to:
(1) Remove the front right wheel.
(2) Four bolts shall be removed and the arch removed.
3) Open the hood, unwind 6 bolts and remove the plastic protection of the engine.
(4) With the help of the "on 17" head, the automatic tenor of the belt shall be weakened.
(5) Loosen and remove the belt.
(6) Remove auxiliary units of auxiliary units, kanwala, hydraulic amplifier.
(7) Remove the four bolts by removing the upper HM-belt cover.
8) Remove the five bolts, remove the second cover.
9) Remove the 12 bolts, remove the bottom cover.
(10) Unprotecting the engine and neatly cleaning crankcase with the support of the engine.
(11) Shoots and rollers of the GRM.
(12) Change the belt by 3 marks (cap and two breakers).
(13) Set it all back.
