The replacement of the pap on Santa Fe with the engines of 2.0 and 2.4 litres is as follows:
(1) Cooling coolant.
(2) Disconnect the cooling hose from the pump.
(3) The generator and pulley belt shall be removed.
(4) Remove the lid and the tenor of the GRM belt.
(5) Remove the anchoring bolts by removing the generator's adjustment bar.
(6) Pump the refrigeration system.
(7) By installing a new circular gasket in the inlet to the inlet pipe, lubricating it with water.
(8) Install a new pump and tighten the fixing bolts between 20 and 27 Nm.
(9) Set all the details back, by adjusting the tension of the GRM belt and the generator belt drive.
10) A pour into the antifreeze system.
