The contaminated throttle control may cause engine instability at idle speed. The vehicle may also be lost periodically.
It may take 30 minutes after the engine shuts down. Then we need to remove the iron handle from the corrugated iron tube. If a tan is found inside the node, you must turn off the throttle power, spin the stiletto throttle, and turn off the throttle. Then you must disable the battery. It is necessary to remove the gasket before clearing the shale.
Purifier for carburettors or throttle shall be used for cleaning. It's very important to get rid of the suntan part of the shale. The Nagar makes it difficult to open the throttle.
