This procedure requires a key already written in the car, as well as a key to be programmed. The order of your actions is as follows:
Sit down in the car with both keys, close all the windows, doors.
-The wrench shall be inserted in the ignition and turn it into position '1'.
-Return the key to the "0" position and remove the key from the ignition.
-Click the Unlock button on the wrench and click the Close button 3 times.
-Release the button and watch the doors-they have to close and open.
-Click the "Rebuild" button on the new (programmable) key and click the Close button 3 times. Release the button and verify that the doors of the car are closed and opened again. This procedure is complete, and if you did everything correctly, you successfully tied the new log to the normal alarm.
