To check the functionality of the wheelhouses, do the following: Apply the labels to the tip and the drive for the correct alignment in reverse installation. It shall be between 0.5 and 3.5 Nm (models with the GRM) and 0 ,3 ... 2 (models with EID).
- Apply the labels to the tip and the drive for the correct combination during the reverse installation.
- Unwind the stop nut and remove the tip.
- Secure the nozzle in the vice.
- Bend the nut to the finger of the hinge.
- With the help of a chassis dynamometer, rotate the nut with a frequency of about 1 rotation in 3 seconds.
- I'm measuring a 5-th-turn moment. It shall be between 0.5 and 3.5 Nm (models with the GRM) and 0 ,3 ... 2 (models with EID).
