In order to replace the rear loelers of the longitudinal levers on the Opel Vetra B, the following steps must be taken:
1) The back of the car and the wheel is removed.
(2) With a thin piece of chalk, plunder the longitudinal lever.
3) The key on "on 16" twirt two bolts and remove the stabilizer.
(4) The key "by 18" is the twisting of two bolts of transverse levers.
(5) Crying the levers and placing a wooden NDR (NDR) between them so as not to sever the dust on the site blocks.
(6) By using the T-10 TORS key, the attachment of the parking brake cable.
7) Break the rack-mounting bolt.
8) Remove the ABS sensor connector.
9) Unrest cage nuts. We leave one so the hub doesn't fall off.
10) Put the container under the subport and slightly disline the brake-connection.
(11) The rest of the rack and the last nut on the hub (the step shall be supported by the assistant).
12) Unspin the connection, quickly remove the hub and spin the thing back.
13) Remove the three bolts and remove the longitudinal levers.
14) Scrolling the plate, cut the rubber, and kick the sailer block.
(15) Roving seats with a file and sandbox.
(16) Install a new site block, paying attention to its correct position.
(17) Enclose the site.
(18) Install all back and pump the braking system.
