For the replacement of the CHOU VAZ-2108/09/99, the garage will require: a lift for the helmsman, a key for 27, heads for 17 and 19, a special key for 30 for the steps and a lever (metal pipe), a flat scrap (for disconnection of the shaft and a PPC), a lubricant of the ShRUP4.
Procedure for the replacement of the ŠRUUS
1. Remove the protective cap, uncover the hub, weaken the hub. "Blow" Wheeled bolts
2. Lift the wheel, lift it, unscrew the hub nut.
3. Clean the oil from the box to the pure capacity.
4. Shear and remove the nut of the steersman's steersman's key
27. Pull out the finger of the tip from the seeder's position
5. Remove the ball support bolts.
6. Taking the step away, removing the shaft of the shaft of the shaft of the CHOU from the PPC.
7. Shrup the shaft, remove the "grenade" (if changed separately). To collect a drive with a new grenade.
8. Insert a transmission into the opening in the checkpoint, trying to get into the faces that are inside. To hit the shaft by the end of the shaft through a wooden block, so that the shaft would rise.
9. Fill the oil in the box.
10. Hoping, spinning the nut. Delete the wheel, stop the car with the handbrake, put it on the gear, and put the shoe on the wheel. Tighter the hub nut and sodium it.
