First, we need to weigh the front wheels of the car. You can use 2 jacks to do this. Then we need to open the hood and drain the syringe from the water-amplifier. There's no drain on the bottom of the tank, and it's going to have to dismantle the tank. He's got three bolts. The tubes that match the bam need to be lowered into the drain reservoir for the old liquid.
Now we need to put the bug in place, put on the bottom of the tube, and into the top hole, screw the bolt, fill it up to the maximum level, and rotate the steering wheel in different directions. The new liquid will wipe out the old one. The process is easy to control by focusing on the colour of the liquid. It'll take about 800 ml. After all the old liquid comes out, it is necessary to twist the bolt, put the upper tube in place, rotate the steering wheel and make the liquid up to the necessary level (middle between minimum and maximum).
