To replace the front steps of the Citroen C4 vehicle: Install the front wheel, unwind the wheel hub, remove the brake disc, remove the brake disc, remove the brake disc. Then remove the brake disc with two screws. Then gently pull the back of the disc. Then unscrew the wheel bolt from the lever, the steering wheel and the rack. Then press the bearings of the bearings. so push the step from the swivel pin only to replace the foot bearing. To get a bearings from the flange, you will need a hydraulic press kit with a set of special plug-ins. The process of pressing and reasseming is done in reverse order.
- Record the car with the handbrake and tip the front wheel.
- Reach the axial cage, detach the drive, dismantle the brake sub-port by twitting the two bolts.
- Then remove the brake disc by twitting two screws.
- Carefully remove the ABS sensor by unlocking the bolts.
- Next, unscrew the hub from the lever, the helmsman, and the rack.
- Then press the bearings from the hub.
- Attention: the bearing of the bearing is destroyed, so that the foot is removed from the swivel pin only to replace the bearings of the hub.
- A bearings of a bearing flange will need a hydraulic press with a set of special diameter-suppressors.
- The process of pressing and asseming is done in reverse order.
Original plate numbers for Citroen C4: 1606623580/335084/335069/335016
