The replacement of the steering gear shall be as follows:
1. Make the car a jack, remove the front wheels;
2. by means of a key on "19", unscrew the nut on the tip;
3. by means of a key on "22" to loosen the counter-nut at the reika holding the nozzle;
4. Disconnect the steering gear from the wheel;
5. rotate the tip from the gear rack and it is recommended that the speed limit be considered so as not to adjust the adjustment of the geometry of the running gear.
6. Inline the new spout with the same speed;
7. To assemble the node in reverse order;
8. carry out all actions with the second arrowheads.
It is not permitted to replace only one tip-they must be changed in pairs, otherwise problems may arise with the geometry of the navigation. It also makes sense to adjust the convertiles after the independent replacement of the steering gear.
