There are several reasons for the pounding of the first generation of BMW 1: The loosening of the tensile strength of the stiffness of the stiffness. Eliminates a subtraction screw. The loosening of the V-drive attachment. The tightening of the mounting bolt is fixed by the relaxation of the suspension of the suspension. It is eliminated by the replacement of the bolts. The loosening of the shock absorber to the swivel pin. It is removed by the replacement of bolts and nuts. It is removed by replacing the lever in the assembly with the tip of the ball. It is removed by replacing the two drive trains with the pivot of the stabilizer bar. It is removed by replacing both pivot points of the stabilizer bar. The pivot points of the stabilizer bar are removed. Corrects the replacement of the frames.
- The loosening of the tensile strength of the stiffness of the stiffness. Eliminates a lift.
- The relaxation of the V-drive attachment. Eliminates a lift.
- The relaxation of the fixation of the suspension of the suspension of the bed. Eliminates the replacement of the bolts.
- Weakening of the shock absorber to the turning-point. Eliminates the replacement of bolts and nuts.
- A ball-bearing bow. Eliminates the replacement of the lever in the assembly.
- A nose tip. Eliminates the replacement of both steering rods.
- nose bar of the stabilizer. Eliminates the replacement of both joints of the stabilizer.
- A stabilizer foot bar. Corrects the replacement of the frames.
