Replacing the front suspension blocks on the Audi 100 C4

Switch on the front suspension blocks of Aroudi 100 C4 in this sequence: We turn off the front of the car and take off the wheel. And we take off the stabilizer. Unroll the stabilizer, unscrew the wire, disconnect the wire from the generator to the starter generator. Let' s roll over three screws and remove the back sides of the imitals. We don't finish it to the end so that it's easier to put the imprint. We put the front saloons on the imprint and put new things in it. Let' s put it on the side of the imprint and tighten the back of the back.

1. The front parts are the front end of the car and the wheels are removed.
2. We're taking off the battery.
3. Unwind the stabilizer.
4. Unwind the imitation of the imitation, by undoing the wire from the generator to the starter.
5. Unwind three bolts and remove the back sides of the imitation.
6. Let' s get new. We don't finish it to make it a little easier to put on the mimic.
7. You keep the front sainers-the blocks of the imprint and put in a new one.
8. Let' s put the imitation on the seat and fasten the back seat belt anchorage.
9. We collect it all back and do a wash/ascent.

Add comment