Vehicle interior

Details

Written by: Jason Hance

Also available:

Created: 02 May 2023

The active head restraint of the front passenger in KIA Sorento II often takes out the creaking. Extraneous sounds are issuing a movable plastic plate controlling the spring, and the spring itself inside the head restraint design

Details

Written by: Jason Hance

Also available:

Created: 02 May 2023

The first thing to do is dismantle the air flow control handle. It will require a pair of pliers as well as a piece of rubber to avoid scratching the handle. Sing with a pair of pliers, pull it on you.

Details

Written by: Jason Hance

Also available:

Created: 01 May 2023

The dashboard in Aveo T-300 is sufficient, so it is recommended to use a rag from the microfibers to remove the dry dust. To remove some pollution, it is desirable to moisturize a torpedo cleaner.

Details

Written by: Jason Hance

Also available:

Created: 01 May 2023

The Skrup comes from the place where the torpedo plastic is in contact with the plastic lid of the central tunnel. There are two guides on top of the cover, wrapped in special material

Details

Written by: Jason Hance

Also available:

Created: 01 May 2023

In the Russian version of Chevrolet Aveo T-300 there are no airbags. For this reason, it is prohibited to transport a child in a chair in the front seat. In addition, there is no anchorage for children's chairs

Details

Written by: Jason Hance

Also available:

Created: 30 April 2023

First we need to remove the glove box at the bottom of the torpedo-without this filter removed. There's a cross-plate behind the glove, which also needs to be turned off. The filter is in a black plastic assembly, inserted vertically

Details

Written by: Jason Hance

Also available:

Created: 29 April 2023

The door to Aveo 2 is placed on two bolts under the nut 7 mm, one of which is behind the door handle, the second behind the closing handle. It is necessary to remove the bolts from the decorative stubs

Details

Written by: Jason Hance

Also available:

Created: 29 April 2023

To get rid of the stoking in Kia Sorento 2, the following steps must be taken: 1. Plastic skin of the level-2 adjustment mechanism shall be removed

Details

Written by: Jason Hance

Also available:

Created: 28 April 2023

In order to remove the shelf behind the rear seats of the sedan, careful not to break and to spin five small winks behind the previously overturned back seat backs. The shelf is then removed from the fixation

Details

Written by: Jason Hance

Also available:

Created: 28 April 2023

The Chevrolet Aveo has two retainers: the one with the plate latch (on the right) to lift the head restraint, the one on the left is used to remove the head restraint. Squeeze the retainer to the right with a screwdriver and head restraint without force, nothing to pull