In order to change the headgear of the first generation BMW one will need a Phillips screwdriver and an old plastic card. Replacement procedure:
The card is picking up a decorative bar of the console, which is a little bit above the top of the magnet. Panelescu may not be removed-it is enough to free the left edge.
Heel the heater unit and the air-conditioner. Then, carefully release it from latches and push back to gain access to the attachment screw.
Unwind the screws and pull the magnets. Detach the main connector and the antenna.
We take the Professional device and plug in the connectors. The main plume needs to be turned upside down.
Set it all back.
