Replacement brake pads on the Volkswagen Tuareg 2 are performed in the following order:
(1) Rise the car and remove the wheel.
(2) With a nail and a rubber hammer, the pad shall be flashed.
(3) Remove the spring plate.
(4) A little pinch and pull out of the disc.
5) Remove the pad wear meter (it can be tried again).
6. Pushing up. It's better to press four at the same time. It is also possible to crush the pistons with the VagCom cable-the program controls the ABS motor-cars that pull the pistons.
7) Put new pads on and install it all back.
