The procedure for replacing the front brake by the Toyota Land Cruiser 200 is as follows:
(1) Wheel.
(2) Sour of brake fluid.
(3) With the help of a gas key or other device, gently move the subport to the edges.
(4) With the help of the cookie, we get the top of the thumb. We're also pulling the bottom finger out.
5) Take off the pressure spring.
6) Extracting old pads. They have two antinoise plates.
7) Take the new pads, smear special lubricant, install anti-noise plates on them and put in the brake mechanism (pad with "write", put on the inner side).
(8) Install everything in place.
9) Change the wheels on the second wheel.
(10) Pour the brake fluid if necessary.
