To replace the vacuum amplifier on Lifan Solano, it is necessary to remove the main brake cylinder with the bacht first. Then, do the following: We unplug the wheel of the vacuum hose of the left front wheel to the left front wheel of the vacuum tube and disconnect the hose from the back valve plug.

  • Unwind the nut of the brake hose of the left front wheel that connects it to the interposer.
  • Loosin the vacuum hose and disconnect the hose from the non-return valve.
  • A splint of the amplifier's forks and pulling the finger off.
  • Scrolls the four nuts of the brake pedal arm.
  • Take off the adsorber and the adsorber adsorber.
  • Moving the vacuum amp forward to get him out of the creaking studs.

Before installing the new amplifier, if necessary, I will install an amplifier and a non-return valve. After installation, the brake system shall be pumpsidown.




Add comment

Security code
Refresh