Replacement of the main brake cylinder on Lifan Solano in this order: Disconnect the tube from the battery pack and remove the brake fluid from the GTZ. We roll the brake fluid from the brake fluid. We unplug the connector of the brake fluid. of the main brake cylinder. Now, the new GTZ, with the new tulks and the new sealevel ring. And then we pour the brake fluid and we pump the system.
- Disconnect the wire from the battery.
- Scrolling the top of the GTZ and get the grid.
- Use a syringe or a rubber pear to pump the brake fluid out of the bar.
- Disconnect the brake fluid level sensor connector.
- Unwind the nuts and bolts of the piping to the GTZ and disconnect the hoses.
- Put on the pipes of the filler so that the brake fluid does not flow.
- Scrolls the nut clip of the GTZ on the right and the removal of the pipeline to the direction of the piping.
- Unwind the nut on the right and remove the GTZ with the bam.
- Vacuum amplifier is removed.
- Unscrew the screw and remove the tank from the main brake cylinder.
- By becoming a new GTZ, installing new inserts and a new sealing ring.
- Fill out the brake fluid and pump the system.