Car body

The holes in the grille on the Chevrolet Cobalt are large enough. Therefore, it does not protect the radiator from stones and other objects very well. To avoid damage to the heat sink, you can install an optional security grid

The bumpers from the Russian Sportage III are not suitable for similar models gathered in Korea. The American Sportage III also has many details different from those in Europe. On this basis, order details, we need to check the details of which picking and what market is offered

To remove the bar, you must dismantle the top of the Chevrolet Cruze. The plating is docked with paistons, which are convenient to remove with a flat-blade screwdriver. It is possible to find attachment of the bar-four nuts and two pitons

The Chevrolet Cruze has a wide range of automotive enamels. If you do not have to address the dealer's service, you can order the paint of the desired color like any other part. This can be done, for example, in an online spare parts store

The overheated heating area of the parking lot is a common problem for Kia Sportage 3. It is expressed in the lower corner of the windshield something spiking and smoking. If it happens, it's better not to turn on the heat. You can replace a windshield with a problem.

The most common problem is found in Chevrolet Cruze cars of the Russian production. The main reason is that the door locks are not properly configured. The winter situation is complicated by the frozen seal

The Lachet nozzle can be removed from the inside of the hood cover. First, disconnect from the injectors of the inlet washing liquid. After that, you have to squeeze the tabs out of the nozzle with the pliers and pull it on yourself

You can repair this problem yourself. To remove the side mirror, first remove the black triangle above the side of the door, then unscrew the sour, remove the sheathing. There are three eyebolts beneath the plating, which hold the mirror

The original sprays cost 150 to 200 rubles per unit. They are affixed to the regular positions (even the self-mounting of the anchorage)-the drills are not necessary, the wheels are not required to be removed

Two methods are used by the owners of Chevrolet Lacetti in this problem. The first is to process the place where the graphite grease is removed