Car body

Chery Tiggo window removal

Chery Tiggo window removal
On Tieggo, the windows of the open windows begin in time. There are no extraneous sounds in the closed state. You can solve this problem by yourself. You will need to purchase a flat sealant for your home windows

Chery Tiggo rearmost door removal

Chery Tiggo rearmost door removal
Tighgo's back door closes with an unpleasant crash. This shortcoming can be addressed on its own. I need to open the back door and find two staples on the prom and the door. Check to see if there are traces of work on both brackets or only one

It was painted on the KIA Sorento II doors.

It was painted on the KIA Sorento II doors.
The paint on the body parts, and especially on the boot door, is a fairly common problem. The reason is the condensate and the bad corrosion-resistant coating. The problem is the repainting of the guarantee from an official dealer

Removing the radiator grate in Chevrolet Aveo

Removing the radiator grate in Chevrolet Aveo
To remove the heat grill at the front of the Chevrolet Aveo body, it is necessary to: 1. Remove the six clips from the top. The top four is carved, and two on the sides is no tires. Unbend the bars and roll six screws.

How do I remove traces from the shipping tape at Chevrolet Aveo 2?

How do I remove traces from the shipping tape at Chevrolet Aveo 2?
On the new Aveo you can see traces of the shipping duct tape. You can try to clean up the adhesive with a vase disc soaked in alcohol. This is a rather slow and laborious process. Some drivers prefer cleaning the White Spirit

KIA Sorto II coated with chrome plating

KIA Sorto II coated with chrome plating
The chrome on the handles of the doors, the grille of the radiator and other parts of the body is a phenomenon for KIA Sorento II more than distributed. Some owners change the details of the garage, others change the vinyl film

How to install the windshield washer trout in Chevrolet Aveo

How to install the windshield washer trout in Chevrolet Aveo
The Chevrolet Aveo is suitable for Volvo. Order number: 30655605. To replace the bonnet, you must open the hood and disconnect the washer hoses. Then we need to put pressure on the nozzle with the pliers and pull it off the outside of the bonnet.

To replace the beachman tank in Chevrolet Aveo

To replace the beachman tank in Chevrolet Aveo
First, it is necessary to remove the front wheel and cover on the driver's side to gain access to the beachhead. A bop in the subfloor of Chevrolet Aveo on three bolts. The next step is to disconnect the terminals from the two motor scooters.

Preventing the appearance of dents on the KIA Spectra

Preventing the appearance of dents on the KIA Spectra
If when the KIA Spectra is closed from time to time, it is not impossible to apply a hand to the KIA Spectra. Therefore, it is recommended that you release the hood cover from a height of 20 cm. With a properly configured lock, the bonnet lid will be shut down without additional effort

Small, warmed points at Chevrolet Aveo 2 doors

Small, warmed points at Chevrolet Aveo 2 doors
A similar defect is visible on the doors of light shades. This is often not a damage to the LCP, but a drop of gasoline after filling or traces of stones. No washing of these "gags" will remove