Car body

During the winter of the year, many owners of the [ [ A4]] [ [ 4th generation]] s [ [ A4]] s are required to turn off the [ [ headlight]] [ [ headlight]], as with frozen [ [ pollution]] s, he is unable to manage and consumes a lot of cleaning fluid

The car is exposed to corrosion at the factory. The protective layer covers the body, including the hidden cavity and the bottom

In general, the problems with the bodywork of the 4th generation [ [ 4th generation]] [ [ 4th generation]] are almost no-it is well resistance to corrosion and is distinguished by a quality varnish coating

Adjustment of the front bumper for the 3rd generation Audi A4: Remove the front bumper and headlights to gain access to the height controls.

It is necessary to put a pin, needle or piece of rigid wire in the KIA Rio III solver: it is necessary to put it in the housing and send it to the necessary side. It is important that the tool does not damage the housing and increase it in diameter

To remove the front bumper at the A4 3 generation, do the following: Scrolls 3 screws from the top of the bumper.

Remove the rear-view mirror on the fourth generation of 4th generation in this sequence: Lean adhesive tape to protect it from damage.

Before you disassemble the KIA Rio III mirror, you need to remove it. To do this, remove the plastic filler in the passenger compartment and roll three screws. Then you can begin parsing the enclosure itself. We need to put pressure on that part of the mirror that's closer to the door.

In order to improve the work of the glass washer on A4, 3rd generation it is possible to install windshield nozzle. To do this, first remove the old-release tabs, remove the wiring chips using a flat-blade screwdriver, and disconnect the washer hoses

The lattice of the fourth generation of 4th generation radiator grill is large enough to cause damage to the radiator with foreign objects. To avoid this, you can install an additional security grid