Car body

The main reason why the VAZ-2110 wiper blade does not reach the edge of the glass is the windscreen (tojabo)-it is the windscreen wiper

Often the next day after the first generation, the eye can stop closing doors (or one of the doors). The reason is the lock mechanism. Since it was the cravings, it was useless to spray the grease directly in the lock of the lock

The most common problem is that the hood stopped opening. The problem is the plastic card that connects the lock with the lock directly with the lock. It is possible to open the hood only by a screwdriver to the "face" of the castle, which is attached to the sausages

In the event that the liquid of the washer fluid has stopped working on the VAZ-2110 windshield, the problems should be found in the following locations:-Motorchier. We need to check if the battery comes directly from the battery.

Uneven gaps are the known problem of the third generation. The assembly defects in the front of the vehicle are particularly visible in the bonnet and bonnet communication area.

Many Ford Focus owners have noticed that the rear-view mirror on the passenger side is closely adjacent to the side window, and the driver's side is not at the end. This is not a malfunction

The window-lift motor in the VAZ-2110 can fall back and remain in the door after the replacement of the trapeze or the window-lift motor. It is possible to understand that the arm is left in the door, can be characterized by a single claty knocking at the beginning of the glass movement

Frequently, the Focus 2 has a bonnet on the hood, just above the Ford logo. The dent is the result of the pressure on the bonnet when it is closed. The cars recommend that the hood be closed, while the rest of the car will close at a height of about 15 cm.

The main cause of the problem is the wire between the body and the door (lid) of the trunk. The problem is chronic. After restoring a contact, it is recommended that you increase the isolation level

The main reason for the rise in the VAZ-2110 glass is not enough high air temperatures from the stove. The best way to start a problem with the engine cooling system is to find the source of the problem